Jinyun Li Jie Machinery Manufacturing Co., Ltd. --- permanent magnet magnetic separator maintenance and maintenance of high intensity! ! ! When removing the cylinder to be careful! Tired attention between metal objects and magnets grip! 9 out of the barrel, and now, a single push plate feeder manufacturers address, remove the remaining end of the container housing the two 1/2 "bolts and washers Note that both lock the trigger switch mounting bracket bolts than the other 10 to long .10 (magnetic separator) core weighing about 150 pounds. Current Affairs removed the necessary care. Make sure that all metal objects should be removed from the vicinity of the core. Prevention of high-strength magnets! 11, at the end of the stent cylinder container 5/8 "threaded bolt one, install two mounting / dismounting lever hand-tighten the bolt heads protruding portion. (At the end of the container opinion, they are two short bolts). You may need to pin the other end, Anhui single push plate feeder, slightly lift the hydraulic cylinder to ensure square head can in the hole (position) is appropriate. Note tired grip! Features Jinyun Li Jie Machinery Manufacturing Co., Ltd. --- magnetic separation technology classification disks law: a superconducting electromagnetic filter characteristics are: very high magnetic field strength and magnetic gradients, a single push plate feeder Which is good, electromagnet not heat, less power consumption, lower operating costs, can be made continuous work magnetic filters. Single push plate feeder retail | Anhui single push plate feeder | Li Jie machinery provided by Jinyun Li Jie Machinery Manufacturing Company Limited. Jinyun Li Jie Machinery Manufacturing Co., Ltd. (www.jyljjx.net) strong, credible, in Lishui, Zhejiang industrial automation control systems and equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Li Jie machinery into the brilliant and you work for a better future!