Jinyun Li Jie Machinery Manufacturing Co., Ltd. --- magnetic separator maintenance and installation of the core Jinyun Li Jie Machinery Manufacturing Co., Ltd. --- magnetic separator maintenance and installation of the core 3, adjust the hydraulic cylinder rod coupling. This regulation is in the entire device is installed, to set the distance between the calibration plate and cover the. 4, the fastener on the magnetic separator used to be the torque locking guide for proper torque values. Do not use wrenches! ! Use a Phillips screwdriver to lock the bolt on the cover. 5, the device back before use to check the cylinder and hydraulic components for leaks. If the leak, then re-lock the cover and the base plate bolts (cover on a 1/2 "bolt more than one connection line grinder retail, the bottom frame is the rear 5/8" nut 6, after confirming proper operation, and then back into line work . Jinyun Li Jie Machinery Manufacturing Co., Ltd. --- magnetic separator you reset the ready / start position to confirm the position of the safety valve when prompted to restart: When the initial start-up, to ensure the supply and return lines all the isolation valve fully open Before the position on more than one grinder cable supply, do not press the reset button and start button. The device has a self-draining features, under pressure liquid effluents released into the waste collection system in order to prevent injury, this drainage system whether it is strong or flexible tubing used on, make sure the safety. a) verify that the water supply and return pipes of the isolation valves are in the fully open position, and ensure that any part of the system do not exist blockage problems. b) to ensure that the pipeline blue filter vent valve and drain valve closed, and to ensure a clean basket c) to verify the magnetic separator at the top of the exhaust valve is closed, to ensure that the main control room of the automatic drain valve is closed more grinder cable retail, Li Jie Machinery (online consultation), Jiangsu multiple cable grinder provided by Jinyun Li Jie Machinery Manufacturing Company Limited. Jinyun Li Jie Machinery Manufacturing Co., Ltd. (www.jyljjx.net) is an industry leader in Lishui, Zhejiang, industrial automation control systems and equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customers needs. In Li Jie mechanical leadership with the staff warmly welcome all inquiries negotiations to create a better future for Li Jie machinery.